丨
The HS‑OD05 is a heavy‑duty fully welded wall‑mount outdoor cabinet built for harsh exposed semi‑outdoor and wall‑mounted field installations. Unlike flat‑pack knock‑down cabinets assembled on‑site with bolt‑joined panels that risk seal gaps and frame loosening over time, this unit comes factory‑welded as an integral rigid body, delivering consistent sealing performance and long‑term structural stability.
Available with selectable IP55 or IP65 ingress‑protection ratings conforming to IEC 60529 / GB 4208‑1993 standards, it supports standard EIA‑310‑D / IEC297‑2 19‑inch rack‑mount equipment. Standard rack‑unit heights range from 4U up to 22U, with fully customisable dimensions for bespoke project requirements. Constructed from thick‑gauge SPCC cold‑rolled steel with reinforced 1.5 mm mounting rails, it reaches 60 KG maximum static load capacity. It is equipped with integrated rubber sealing gaskets, rear heavy‑duty wall‑mount brackets, dedicated bottom cable‑entry flanges and door earthing jumpers. Operating reliably across ‑30 °C to +65 °C and up to 95 % relative humidity, it accepts optional cooling fan kits, custom cut‑outs and OEM branding. Certified ISO9001, CE, RoHS and SGS compliant, this enclosure is widely adopted for municipal surveillance, FTTH access nodes and industrial weak‑current outdoor projects.
1. Factory Fully‑Welded Integral Frame (Key Differentiator vs Knock‑Down Cabinets)
Most competing wall‑mount outdoor cabinets are knock‑down flat‑pack designs assembled on‑site with bolt connections. Bolt joints can shift and create tiny gaps after temperature cycling and vibration, gradually breaking water‑dust sealing performance. HS‑OD05 uses factory‑complete welding to eliminate assembly‑induced gaps from the origin. The welded shell maintains consistent seal geometry for years of outdoor exposure and avoids frame loosening risks.
2. Dual‑Choice IP55 / IP65 Ingress‑Protection For Targeted Site‑Matching
Buyers can select IP55 for sheltered semi‑outdoor locations or upgrade to IP65 for fully‑exposed wall‑mount spots subject to high‑pressure water‑jet washing, heavy rain and pervasive fine dust. IP65 variant completes 30‑minute 0.2 MPa water‑spray testing with zero internal water penetration, fully protecting sensitive switches, NVR and optical transmission hardware.
3. Reinforced Steel Build With 60 KG Static Weight‑Bearing Capacity
Thickened 1.5 mm 19‑inch mounting rails prevent bending under loaded equipment weight. Total 60 KG evenly‑distributed static load supports fully‑populated combinations of NVRs, PoE switches and optical distribution hardware without cabinet‑body deformation under long‑term wall‑hanging conditions.
4. Complete Pre‑Integrated Field‑Installation Hardware
Ships pre‑equipped with heavy‑duty rear wall‑mount brackets, door‑to‑chassis earthing jumper and sealed bottom cable‑entry flanges. Cable‑entry flanges minimise dust‑moisture ingress at wiring points. The door earthing cable guarantees equipotential bonding to suppress static and EMI interference for installed electronics. No extra accessory sourcing required for standard deployment.
5. Extreme‑Range Temperature‑Humidity Compatibility
Stable operation at ‑30 °C to +65 °C working temperature and up to 95 % non‑condensing relative humidity. It adapts to cold‑winter northern districts, hot summer sun‑facing wall‑mounts and humid coastal semi‑outdoor locations without performance degradation.
6. Rich Project‑Oriented Customisation & Global Compliance
Supports custom cabinet dimensions, laser cut‑outs, thermal‑insulation add‑ons and OEM branding. ISO9001, CE, RoHS and SGS documentation is available for international tender‑bid qualification and customs clearance for export‑oriented infrastructure projects.
| Item | Specification |
| Construction Type | Factory full‑welded integral body (non‑knock‑down) |
| Ingress Protection | Selectable IP55 / IP65 (IEC 60529 / GB 4208‑1993) |
| Internal Rack Standard | ANSI/EIA‑310‑D, IEC297‑2, ETSI compliant 19‑inch rack |
| Standard Rack‑Unit Sizes | 4U, 6U, 9U, 12U, 15U, 18U, 22U; custom sizes available for bulk orders |
| Material | SPCC cold‑rolled steel; main shell 1.0‑1.2 mm; mounting rails 1.5 mm |
| Surface Finish | Degreasing, phosphating, electrostatic powder‑coating |
| Standard Colours | RAL7035 light grey; RAL9005 matte black |
| Max Static Load Capacity | 60 KG (evenly distributed) |
| Operating Environment | ‑30 °C ~ +65 °C; relative humidity ≤95 % RH (non‑condensing) |
| Standard In‑Box Accessories | Rear wall‑mount bracket set, door yellow‑green earthing cable, bottom cable‑entry flanges |
| Optional Upgrades | Cooling‑fan assembly kit, custom laser cut‑outs, enhanced thermal insulation |
| Certifications | ISO9001, CE, RoHS, SGS |
1. City surveillance wall‑mount nodes: Wall‑mounted beside buildings for CCTV NVR and PoE‑switch hardware; welded‑body IP‑rated defence protects electronics against rain, dust and temperature swings.
2. FTTH community optical access points: Semi‑outdoor wall‑mount fibre‑distribution enclosure for passive optical splitters and ODF hardware; integral welded shell prevents seal‑failure from seasonal thermal expansion‑contraction.
3. Industrial park weak‑current equipment points: Factory‑wall‑mount deployment for industrial network and control hardware; wide‑range humidity‑temperature tolerance fits plant peripheral semi‑outdoor environments.
4. Municipal smart‑city infrastructure projects: Standardised IP‑rated wall‑mount enclosure for multi‑site public‑sector tender roll‑outs; complete certification documentation supports bidding procedures.
5. System‑integrator pre‑configured cabinet kitting: Factory pre‑fit with 19‑inch racks and accessories for turn‑key project deliveries; custom dimensions and OEM branding available for multi‑site deployments.
Q: What is the major difference between this fully‑welded HS‑OD05 and knock‑down flat‑pack outdoor cabinets?
A: HS‑OD05 is factory fully‑welded integral‑body cabinet, no on‑site panel‑assembly required. Knock‑down cabinets rely on on‑site bolt‑assembly; bolt joints may shift over temperature cycles and vibration, creating gaps that degrade waterproof‑dustproof sealing. Welded‑body design delivers more stable long‑term ingress‑protection performance for outdoor wall‑mount scenarios.
Q: Should I choose IP55 or IP65 rating?
A: Select IP55 for sheltered semi‑outdoor locations without direct high‑pressure water‑jet exposure. Pick IP65 for fully‑exposed wall‑mount locations where cabinets face heavy rainfall, manual water‑jet washing and large‑quantities of fine airborne dust.
Q: What is the maximum static‑load for wall‑mount installation?
A: Max static load capacity is 60 KG with evenly distributed weight. Do not apply concentrated point‑loading. Ensure building wall substrate is structurally adequate to support total cabinet plus‑equipment weight.
Q: Does this cabinet include mounting hardware and earthing accessories?
A: Yes. Standard delivery includes rear wall‑mount bracket assembly, door‑chassis yellow‑green earthing jumper and sealed bottom cable‑entry flanges.
Q: What environmental temperature‑humidity range can this cabinet endure?
A: Operating range: ‑30 °C ~ +65 °C, ≤95 % non‑condensing relative humidity. Condensing‑humidity environments require additional ventilation or insulation customisation.
Q: Can I get custom dimensions, cut‑outs and OEM branding for large‑volume tender‑projects?
A: Yes. Bulk‑project orders support custom cabinet sizes, laser cut‑out layouts, thermal‑insulation treatment and OEM silk‑screen / laser‑engraved logo marking.
Q: Are compliance documents available for international tender‑bidding?
A: Yes. ISO9001, CE, RoHS and SGS test‑reports and certification documents can be provided for tender‑qualification and customs‑clearance purposes.
