丨
VH‑4089 is a 19‑inch 1U rack‑mount configurable power‑distribution chassis engineered for multinational integrators, export cabinet manufacturers and multi‑regional enterprise infrastructure projects. Unlike region‑locked PDUs (Danish VH‑4084‑4086, South‑African VH‑4079‑4081, Australian VH‑4061‑4063) with permanently fixed local‑market sockets, this chassis adopts a field‑replaceable socket‑module architecture. Operators swap out socket inserts on‑site to match local national standards without discarding the main PDU housing.
Every functional bay supports hot‑swap insertion of control, protection, metering and communication modules, allowing complete re‑configuration to satisfy diverse tender specifications across different countries. Rated for max 16A, 250VAC, CE & RoHS certified, compliant with EIA‑19‑inch rack norms. It reduces multi‑SKU inventory burden for global suppliers and enables hardware reuse during cross‑border project redeployment.
Core positioning: Re‑configurable universal modular chassis; field‑swap socket modules eliminate multiple regional‑specific PDU stock‑keeping; full‑function hot‑swap bay design, for multinational turn‑key cabinet projects and export‑oriented OEM programmes.
1.Field‑Replaceable National‑Standard Socket‑Module Architecture
Most universal‑type PDUs adopt compromise multi‑hole combo sockets with poor mechanical fit for genuine national‑spec plugs. VH‑4089 uses discrete, dedicated socket inserts. When a project shifts from Germany to South‑Africa or to US deployments, technicians only swap socket modules instead of replacing the whole rack‑PDU unit. This enables chassis reuse for project relocation, rental‑fleet cabinet assets and export‑demo hardware, greatly lowering total hardware‑lifecycle expenditure.
2. Full‑Bay Hot‑Swap Real‑Time Re‑Configuration
All functional slots are hot‑swap compatible. You can add, remove or exchange control, protection, monitoring and communication modules after rack installation. When project requirements evolve — adding surge protection for thunder‑prone sites, inserting meters for capacity auditing, deploying remote‑monitoring for edge‑sites — no full‑rack power‑shutdown or main‑body replacement is required. This suits multi‑phase multinational roll‑out programmes with changing local‑site technical clauses.
3. Single‑Chassis Strategy To Cut Global Inventory Complexity
For global system integrators and cabinet OEMs, stocking dozens of region‑specific finished‑PDU SKUs brings high warehousing pressure, capital tie‑up and forecast risk. VH‑4089 allows you stock a unified base chassis plus separate sets of socket / function modules. Build‑to‑spec happens either pre‑shipment at factory or on‑location, drastically shrinking the number of finished‑goods SKUs you need to maintain.
4. Hardware‑Level Compatibility With Rich Global‑Module Portfolio
The complete module library covers mainstream global requirements: European national sockets, South‑African SANS, Australian AS/NZS3112, NEMA US, UK BS‑1363 etc. Together with corresponding switches, breakers, surge units, meters and communication interfaces. No third‑party adapter accessories are required to achieve local‑market compliance.
5. Multi‑Scenario Mounting For Worldwide Diverse Cabinet Hardware
Delivered with complete TP‑series adjustable bracket portfolio. Beyond standard 19‑inch horizontal racks, it supports vertical wall‑mount and custom non‑standard enclosure fitting, adapting to custom export cabinets, shelter‑type telecom shelters and special‑purpose industrial enclosures encountered across global projects.
6. Complete Documentation Package For Multi‑Country Tender & Customs
Chassis‑level safety test‑reports are provided. When fitted with different socket‑modules, corresponding module compliance documents can be appended, simplifying customs clearance and tender‑qualification submissions in different territories. Bulk‑order OEM silkscreen marking supports private‑label programmes for international resellers.
Deployment note: Chassis ships without socket and function modules. All modules must be ordered separately. For operator safety, power‑down is strongly recommended while performing socket‑module physical replacement work, even though modules support hot‑swap electrical capability.
1. Multinational enterprise distributed IT infrastructure: Cross‑country branch‑office cabinet fleets; reuse chassis when refreshing or relocating hardware, swap socket‑modules according to local electrical norms.
2. Global cabinet‑OEM export turn‑key projects: Cabinet manufacturers export equipment to multiple destination‑countries; hold unified base‑chassis stock and configure socket/function modules to match each target‑market order.
3. Rental‑fleet and demo‑lab cabinet assets: Test‑benches, trade‑show demo racks, short‑term project rental hardware; re‑configure socket‑modules for different destination‑regions without discarding chassis hardware.
4. Multi‑national system‑integrator tender bids: Projects covering multiple territories; one chassis platform satisfies variable socket and protection‑monitoring requirements per‑site.
5. Globally‑deployed edge‑computing & telecom sites: Remote worldwide edge‑nodes; add surge / metering modules post‑deployment as local environmental‑risk assessment changes.
6. International bulk‑sourcing private‑label reseller programmes: Reduce finished‑SKU inventory pressure by stocking universal chassis + modular‑component parts inventory.
| Details | Specification |
| MOQ | 1 unit |
| Custom Options | Custom power‑cable length, OEM logo silkscreen, factory pre‑assembly of selected socket / functional‑modules (bulk‑order only) |
| Monthly Production Capacity | 300 sets |
| Lead‑time | 10‑16 working‑days for bare chassis; 20‑30 working‑days for factory pre‑populated custom‑module builds |
| Packing | Shock‑proof export carton with foam inner cushioning |
| Trade Terms | EXW, FOB, CFR, CIF |
Q: How does VH‑4089 differ from regional fixed‑socket PDUs (VH‑4080 / VH‑4081 / VH‑4061 etc.)?
A: VH‑4089 = universal bare chassis with field‑swap‑able socket‑modules; sockets are not pre‑installed. Regional‑series PDUs (Danish / South‑African / Australian) come factory‑fitted with fixed local‑sockets and are optimised for single‑territory deployments. VH‑4089 targets multi‑country projects where socket‑standard may change for different orders or hardware‑reuse scenarios.
Q: Are socket‑modules included inside the chassis shipment?
A: No. Delivery contains only the main bare chassis. All socket inserts, switches, breakers, SPD and metering modules are separate‑order accessories. Bulk‑volume orders support factory pre‑assembly before shipment.
Q: Does hot‑swap‑capable mean I can swap socket‑modules under live‑power condition?
A: Electrically modules support hot‑swap capability. From site‑safety‑procedure perspective we strongly advise cutting input power before physical socket‑module extraction / insertion to avoid human‑risk during on‑site‑work.
Q: What national‑standard socket‑modules can be matched with VH‑4089?
A: Supports German Schuko, French Type‑E, Italian CEI, Danish SB, South‑African SANS, Australian AS/NZS 3112, US NEMA, UK BS‑1363 and other mainstream national socket‑modules, please consult sales for full module‑part‑number list.
Q: Can I deploy VH‑4089 in non‑19‑inch custom cabinets?
A: Yes. The included TP‑series multi‑purpose brackets support vertical wall‑mount and custom‑enclosure fixing for shelter‑style or special‑dimension export cabinets.
Q: Can we get combined chassis‑plus‑module documentation for multi‑country tender‑audit?
A: Yes. Chassis test‑report plus corresponding individual‑module compliance‑files can be bundled for tender‑submission and customs‑inspection for different target‑markets.
