丨
| Quantity: | |
|---|---|
The VH‑4075 is a cost‑effective factory pre‑assembled 1U horizontal rack‑mount PDU purpose‑built for standard 19‑inch cabinet deployments across Israel. As the baseline switched model in the Israeli‑spec PDU lineup, it ships pre‑fitted with illuminated master power switch and genuine SI‑32 Type‑H local sockets, delivering ready‑to‑install power distribution without on‑site module assembly work. It is the preferred choice for bulk standard cabinet roll‑outs, branch‑office IT racks and routine surveillance deployments prioritising budget efficiency.
Rated for 16A / 3680W at 230VAC, housed in lightweight extruded aluminium alloy and fully CE & RoHS compliant. It sits below the metered VH‑4074 in the product tier, offering reliable native‑socket power delivery at a lower entry price point.
1.Value‑Oriented Pre‑Assembled Switched Configuration
Unlike higher‑end metered or fully modular Israeli PDUs, this baseline model comes factory‑wired with master switch and socket bank. No on‑site component fitting is required, cutting both unit cost and field labour expenses. It is optimised for bulk standard‑spec cabinet projects where consistent, repeatable power hardware is prioritised over bespoke customisation.
2. Natively Compatible SI‑32 Type‑H Israeli Sockets
Genuine SI‑32 Type‑H shuttered receptacles natively accept 3‑pin Israeli 16A plugs, and are also backwards‑compatible with 2‑pin Type‑C europlugs commonly used on mixed‑brand IT hardware in Israel. No third‑party adapters are needed, eliminating loose‑connection faults and compliance issues common with adapted generic European PDUs.
3. Front‑Mount Illuminated Switch Aligned With Local Maintenance Practices
The red backlit main power toggle sits on the front face of the unit. Technicians can isolate full‑bank power for hardware swap‑outs without tracing cables to rear outlets, and the illuminated indicator gives at‑a‑glance status confirmation from across the equipment room — matching standard Israeli data‑centre maintenance workflows.
4. Lightweight One‑Piece Aluminium Chassis
Single‑piece extruded aluminium profile cuts overall unit weight by around 30% compared with equivalent steel PDUs, reducing static load stress on cabinet mounting rails. Its natural convection design also dissipates operating heat passively, suiting typical indoor Israeli server‑closet ambient conditions.
5. Reserved Upgrade Slots For Phased Function Expansion
Although delivered as a complete baseline switched unit, it retains partial expansion slots compatible with the HI‑SUN unified module ecosystem. Users can add SPD surge protection, digital metering or dual USB charging modules at a later stage as site needs evolve, without replacing the entire PDU.
6. Tender‑Ready Compliance Documentation
CE and RoHS certified, with full finished‑unit test documentation supplied to support Israeli customs clearance and commercial / public‑sector tender qualification. OEM silk‑screen branding is available for local resellers building stock‑ready standard SKUs.
• Protection: DY‑series SPD surge protectors
• Metering: DB‑series volt‑ampere dual‑display meters
• Auxiliary: Dual‑port USB charger, RJ45 signal filter
Note: This is a baseline pre‑wired switched unit with limited upgrade slots. For full chassis‑level re‑configurability, select bare‑chassis modular models.
• Bulk standard enterprise server room deployments across Israel
• Branch‑office network & IT cabinet power distribution
• Standard CCTV & security surveillance rack roll‑outs
• Education‑site standard IT cabinet projects
• Local reseller off‑the‑shelf PDU inventory
• Cost‑optimised public‑sector standard‑spec tenders
Q: What is the difference between VH‑4075 and VH‑4074 Israeli PDUs?
A: VH‑4074 is the premium metered model with factory‑integrated volt‑ampere display for real‑time load monitoring. VH‑4075 is the baseline switched model with master switch only, at a lower price point, optimised for bulk standard deployments where built‑in metering is not required. Both share the same SI‑32 socket standard and limited upgrade capability.
Q: Do these Type‑H sockets work with regular European 2‑pin plugs?
A: Yes. SI‑32 Type‑H receptacles accept both 3‑pin Israeli Type‑H plugs and standard 2‑pin Type‑C europlugs, making them suitable for mixed‑brand IT hardware commonly found in Israeli offices.
Q: Can I add a power meter to this PDU later?
A: Yes, a digital metering module can be retrofitted via the reserved expansion slots. It will not, however, achieve the same fully integrated factory‑metered performance as the VH‑4074.
Q: Will this fit standard 19‑inch server racks used in Israel?
A: Yes. It complies with EIA 19‑inch rack standards with adjustable mounting brackets, supporting both forward and reversed rear‑feed installation for different Israeli cabinet wiring layouts.
Q: Does this come with the documentation needed for Israeli project tenders?
A: Yes. The unit carries CE and RoHS certification and is supplied with finished‑unit test documentation to support standard tender submissions and import clearance.
