丨
| Quantity: | |
|---|---|
This Argentinian rack PDU is a 19‑inch 1U horizontal bare‑bone modular power‑distribution base platform purpose‑built for Argentina local cabinet projects. Distinct from factory‑pre‑configured VH‑4103 (pre‑installed master‑switch) and VH‑4104 (high‑port pre‑populated variant), this chassis ships with only native IRAM‑2073 sockets, without any factory‑pre‑fitted switching, surge or overload hardware.
A critical local‑market distinction: although IRAM‑2073 Type‑I shares a similar physical outline with Australian AS/NZS 3112 sockets, its live‑neutral pin polarity is reversed. This unit is strictly engineered to match Argentina’s 220V‑50Hz grid environment. Integrators hand‑pick separate hot‑swap modules according to tender clauses, site power‑quality risk assessment and cabinet‑maintenance workflows. CE & RoHS compliant.
1.IRAM‑2073 Polarity‑Validated Sockets Eliminate Cross‑Region Mis‑Application Risks
Many imported Type‑I PDUs on the Argentinian market reuse Australian‑spec socket internals. While plugs may physically insert, inverted live‑neutral polarity creates hidden safety hazards for single‑pole switched equipment and may fail local electrical‑site acceptance audits. Every socket on VH‑4102 is factory‑wired strictly following IRAM‑2073 polarity rules.
2. Zero Pre‑Loaded‑Function Base Chassis Supports Cabinet‑Level Differentiation
Instead of forcing uniform built‑in surge or switching functions for every rack, integrators procure this bare chassis then add hot‑swap modules selectively. For example: industrial racks in lightning‑prone zones fit SPD modules; ordinary office closets run basic power‑distribution only. This reduces overall project expenditure for mixed‑fleet cabinet roll‑outs across Argentina.
3. Full Hot‑Swap‑Ready Architecture For Phased Argentine Project Cycles
Numerous local tender projects roll out in multiple investment phases. Initial deployment may only require basic power feeding; power‑monitoring or surge protection can become mandatory in later upgrade cycles. Reserved functional bays permit technicians to retrofit modules live on‑site without discarding the existing PDU main‑body.
4. Circuit Calibration Tuned For Argentina 220V‑50Hz Grid Conditions
Electrical layout is validated against local mains characteristics including occasional voltage‑sag and transient‑spike occurrences common in regional industrial zones. The base chassis provides stable baseline power‑transport performance, ready to pair with add‑on protection modules.
5. Complete TP‑Series Mounting Kit For Diverse Local‑Site Cabinet Hardware
Comes with full adjustable‑bracket portfolio, not limited to simple fixed lugs. Supports horizontal rack‑mount, vertical wall‑mount and fitting into custom‑built industrial enclosures frequently seen in Argentinian manufacturing plants and remote telecom premises.
6. Modular‑Split Documentation Streamlines Argentinian Tender‑Audit Workflow
Delivers baseline chassis test‑reports; compliance documents for each additionally‑fitted hot‑swap module can be appended separately. This modular‑document approach fits Argentinian tender practices where safety‑function requirements vary between racks.
| Item | Specification |
| Form Factor | 1U horizontal, EIA‑310‑D 19‑inch rack‑mount |
| Output Sockets | IRAM‑2073 Type‑I Argentinian earthed receptacles, 10A 250V rating each |
| Factory‑Installed Controls / Protection | None – bare‑base socket‑only chassis |
| Rated Voltage | 220VAC, 50Hz (Argentina standard grid) |
| Socket Standard | IRAM‑2073 Type‑I (polarity‑validated for Argentina) |
| Mounting | Full TP‑series adjustable bracket kit; rack‑mount / wall‑fix / custom enclosure |
| Certifications | CE, RoHS |
1. Mixed‑spec multi‑site enterprise cabinet roll‑outs across Argentina
2. Buenos‑Aires and regional industrial‑factory control cabinets
3. Phased‑upgrade government‑and‑education tender cabinet‑programmes
4. Integrator test‑lab and pre‑sales validation environments
5. Export‑cabinet OEM projects targeting the Argentinian market
Q: How should I choose between VH‑4102, VH‑4103 and VH‑4104?
A: Choose VH‑4102 as bare‑bone base platform if you plan to select switching / surge / metering modules cabinet‑by‑cabinet after site‑risk assessment. VH‑4103 is factory‑pre‑built switched variant; VH‑4104 is high‑port‑count pre‑populated model. All three use IRAM‑2073 polarity‑compliant sockets.
Q: Can Australian Type‑I plugs work safely on VH‑4102?
A: Physically they may insert, yet IRAM‑2073 implements reversed live‑neutral pin polarity relative to Australian AS/NZS 3112. For permanent Argentinian site deployment, use genuine local IRAM‑2073‑compliant plugs.
Q: Does VH‑4102 ship with surge‑protection or master‑switch pre‑installed?
A: No, it is bare‑bone base chassis with sockets only. SPD, master‑switch and overload‑breaker are separate‑order hot‑swap accessories to be fitted according to each site’s technical requirements.
Q: Can I add metering and surge‑protection modules after rack‑installation?
A: Yes. Hot‑swap‑compatible auxiliary bays support field‑retrofit of all compatible functional modules without replacing the main chassis housing.
Q: Is VH‑4102 different from the Brazilian VH‑4100 bare‑bone PDU?
A: Both belong to the bare‑bone modular platform family. VH‑4100 uses Brazil NBR‑14136 sockets for dual‑voltage Brazilian grid. VH‑4102 features IRAM‑2073 polarity‑corrected sockets tuned exclusively for Argentina’s 220V‑50Hz mains.
Q: Can chassis‑report plus individual‑module documents be combined for tender‑audit?
A: Yes. Baseline chassis test‑documentation is included; compliance‑files for each fitted hot‑swap‑module may be appended, matching local tender‑checklist practices.
